Nate
  • Male
  • United States
Share on Facebook
Share

Nate's Discussions

Wheel Barrow - Bed Liner?

Started this discussion. Last reply by Nate Apr 6. 5 Replies

Just picked up a new Wheel Barrow...do you think it would make sense to spray the inside with an inexpensive bed liner? I just think it might prolong the life of it. It's a steel bucket. Anyone done…Continue

Mounting a Bench Vise

Started this discussion. Last reply by Justin Mar 23. 5 Replies

I'm fairly new at building things etc. I've been working on a big workbench for my garage. My dad was nice enough to buy a bench vise. I've been reading about how to mount it and most info suggests…Continue

Need advice on mounting Bench Vise (on the AOM Workbench)

Started this discussion. Last reply by Shane Nov 8, 2015. 4 Replies

Good afternoon! I need a little help...I've been craving to build the AOM workbench  and having…Continue

Best family tree website or software

Started this discussion. Last reply by Seitanist Dan Sep 13, 2014. 5 Replies

Any recommendations for the best family tree software or website? I'm primarily looking to capture some info I have scribbled on random papers in an organized fashion. It'd be great to be able print…Continue

Tags: tree, Family

 

Nate's Page

Latest Activity

Nate replied to Nate's discussion Wheel Barrow - Bed Liner?
"Thanks everyone."
Apr 6
Vendetta replied to Nate's discussion Wheel Barrow - Bed Liner?
"The handle components, wheels, and/or screws (or rivets depending on the brand) will give out before the bucket does.Seems unnecessary to me. "
Apr 6
Justin replied to Nate's discussion Wheel Barrow - Bed Liner?
"Spray on bed liner is expensive. Browse the roofing section of the hardware store and see if there's a small can of black waterproofing roof repair stuff. Not the tar. It'd be cheaper and is basically the same thing "
Apr 5
Joshua replied to Nate's discussion Wheel Barrow - Bed Liner?
"I have had the same true temper wheelbarrow for a decade and I have never stored it outside of the ellements and it works just as good as the day I bought it.  In fact there is very minimal surface rust in the thing at all.  I suspect it…"
Apr 5
Jack Bauer replied to Nate's discussion Wheel Barrow - Bed Liner?
"I guess if you're all that concerned about banging-up or scratching it. Still, I wouldn't.  It's a wheelbarrow, not a truck.  It's supposed to get banged-up, it costs about $80 to replace entirely, and, if it breaks,…"
Apr 5
Nate posted a discussion

Wheel Barrow - Bed Liner?

Just picked up a new Wheel Barrow...do you think it would make sense to spray the inside with an inexpensive bed liner? I just think it might prolong the life of it. It's a steel bucket. Anyone done that before?See More
Apr 5
Justin replied to Nate's discussion Mounting a Bench Vise
"thanks for pics. two bolts with nuts plus one lag screw into the frame should work fine! be sure to pre-drill the hole for the lag screw (smaller than the threads though) so you don't split the wood when you screw it in"
Mar 23
Nate replied to Nate's discussion Mounting a Bench Vise
"Thanks everyone...posting some pics.  "
Mar 21
Liam Strain replied to Nate's discussion Mounting a Bench Vise
"A lag screw should be ample support - especially if that's only one of the anchor points."
Mar 20
Chad Gorshing replied to Nate's discussion Mounting a Bench Vise
"Can you post some pictures to help others understand the bench, the frame, the vice ..etc?"
Mar 20
Nate posted a discussion

Mounting a Bench Vise

I'm fairly new at building things etc. I've been working on a big workbench for my garage. My dad was nice enough to buy a bench vise. I've been reading about how to mount it and most info suggests the stationary jaw should extend beyond the edge of the bench so you could hang something down...with the way the mounting holes are on the swivel base the only way I could do that would be to have the bolt go into the 2x4 that is my frame (under the table top). This doesn't seem like a great idea in…See More
Mar 20
Shane replied to Nate's discussion Need advice on mounting Bench Vise (on the AOM Workbench)
"Build a header and run it flat on the edge you'll put the vice on. Drill holes and put a through opt with wing nuts on the bottom."
Nov 8, 2015
Sir replied to Nate's discussion Need advice on mounting Bench Vise (on the AOM Workbench)
"I didn't put anything on my workbench either.  I have clamps for when I need soemthiung fixed.  Admittedly they dont' work that well -- keep coming off."
Nov 8, 2015
John Muir replied to Nate's discussion Need advice on mounting Bench Vise (on the AOM Workbench)
"Think hard about where you're putting the vise - it will eat up one corner of the bench. Maybe use wing-nuts on the bolts you attach it to the bench with, or even better yet a cam and rod set up for quick removal or re-positioning so you can…"
Nov 8, 2015
Liam Strain replied to Nate's discussion Need advice on mounting Bench Vise (on the AOM Workbench)
"I would probably just double up a layer of 3/4" ply under the bottom of the box where the vise is going - to keep that from flexing too much. I don't think you need to worry about the void. "
Nov 8, 2015
Nate posted a discussion

Need advice on mounting Bench Vise (on the AOM Workbench)

Good afternoon! I need a little help...I've been craving to build the AOM workbench  and having recently moved to where I know have a garage...I'm as close as ever. I mentioned to my dad I wanted a bench vise and he got me a really heavy duty one from…See More
Nov 8, 2015

Profile Information

Interests
Music, Mountain Biking, Cooking, Comic Books, Movies, Reading, Spending time with my wife and son.
Books
The Outsiders, Books by Louie Lamour, most classic literature.
Movies
Remains of the Day.
Music
Ramones, Lifetime, Descendants/All, Social Distortion, Strongarm

Comment Wall (2 comments)

You need to be a member of Art of Manliness to add comments!

Join Art of Manliness

At 7:52pm on June 14, 2010, Herb Munson said…
Hi there Nate. Welcome to AoM. Also, I'd like to give you a friendly invite to check out my group, The Great Debate. Just click on "Groups." It's the one with the colorful galaxy picture. It's also one of the most active groups on AoM. In any case, great to have you with us.
At 6:37pm on June 14, 2010, Brett McKay said…
Welcome to the Community, Nate! If you have any comments or questions, don't hesitate to let me know.
 
 
 

Latest Activity

Tim Covone joined Steven C.'s group
Thumbnail

Exercise

Exercise is a crucial part of maintaining a manly physique. Join up to share ideas, get support and discuss plans with other men.See More
1 hour ago
Tim Covone joined Dennis Heins's group
Thumbnail

The Smoking Lounge

Come on in, light up your favorite pipe or cigar, and relax with the rest of us.
1 hour ago
Tim Covone joined Shaun Daws's group
Thumbnail

Philosophers

An open forum for discussion of the big questions.
1 hour ago
Liam Strain commented on Herb Munson's group The Great Debate
"1. Yeah, how did they get that footage? 2. That ship was leaving from Gdansk in the Baltic, less than 20 miles from the Russian city of Kaliningrad. You don't think that we'd be doing the same thing to a Russian ship 20 miles from…"
2 hours ago
Kenneth Cole replied to Sir's discussion US Presidential primaries in the group The Great Debate
"Hooray is right!"
3 hours ago
Kenneth Cole joined Herb Munson's group
Thumbnail

The Great Debate

"Iron sharpens iron." A place for men to impact each other by debate and exchange of ideas. This is a group where no ideas are off limits. If your motto is, "I never talk about politics or religion," this group is probably not for you. A "gym" for thinkers.See More
3 hours ago
Shane commented on Herb Munson's group The Great Debate
"How did Russia Today get that video? Really makes you think, huh?"
4 hours ago
Sir commented on Herb Munson's group The Great Debate
"I agree, but the speech was still okay.  "
4 hours ago

© 2016   Created by Brett McKay.   Powered by

Badges  |  Report an Issue  |  Terms of Service