Hey Gents:

Been an avid AoM reader since 2012 and as you can see in the title, I am looking for a tractor tire for flipping/sledge hammer.

I am in Massachusetts and if anyone could point me in the right direction, that would be great. I don't have a lead at all.

Thanks,

Steve

Views: 67

Reply to This

Replies to This Discussion

I found one on Craigslist a few years back.  Another option I heard about, but haven't done myself, is to find a tire/tractor shop that works with those size tire.

Go to a John Deer dealership and ask what they do with old tires.  Else look for a farm co-op for the same.

True

Thanks 'fellas, just contacted a couple of people from John Deer dealerships, any other place besides John Deer?

You might do one of these:

1.  Go OLD SCHOOL and look up "Tractors" in the Yellow Pages.

2.  Google "Tractors" and your state or "Tractor Tires" and your state

BTW it's John DEERE.

Is there a tire plant in the area.  You might be able to get a defect for cheap / free.

Contact any tire store that deals in agriculture tires. If they don't have an old one, they can point you to a farmer that has one laying around. 

If I were closer you could choose your size lol we have plenty of them

Thanks for the help, wish I was as well LOL

If you live anywhere near New Bedford, go to F&B Rubberized on Washburn Street.

They recycle tires there and usually have hundreds of varying sizes laying around. Talk to the foreman, he should be able to help you out.  

He had told me that they sold gyms and individuals tires before.  Should be pretty cheap.

RSS

Latest Activity

Nature of a Man replied to Nature of a Man's discussion Pornography and property in the group The Great Debate
"Some opinions, are more valuable than those of others, being based on stronger information."
1 hour ago
Tim replied to Diesel's discussion My sex drive is gone! Where did it go?!
"Best of luck, Diesel. We're rooting for you, man."
8 hours ago
Diesel replied to Diesel's discussion My sex drive is gone! Where did it go?!
"Evening Gentlemen Thank you for all of your insights and advice. First off, I have booked a doctor appointment to get my levels checked. Go figure it will be almost 3 weeks before I can get into the doctor. To answer some of the questions. I have…"
9 hours ago
Shane replied to John Muir's discussion Donald Trump Is A Greedy, Creepy, Ignorant Jerk in the group The Great Debate
"President Trump Gives Remarks with President Rivlin https://youtu.be/kQr3Tlx4U0c"
12 hours ago
David R. commented on Shane Belin's group Pennsylvania
"As I continue to move to the Hanover area, I just bought a desk-size Pa. flag to keep in my room (here is Maryland) as part of my "hang in there, you're gonna completely retire and move to Pa. at the end of June 2018"…"
14 hours ago
Nature of a Man replied to Nature of a Man's discussion Autos with quality crafsmanship
15 hours ago
David F. replied to David R.'s discussion Collar stays
"Yep I'm in the same boat.  I found that Brooks Brothers No Iron are actually no iron and I can get shirts that fit really well.  So I wait for the sales and they tend to cost close to what a cheap shirt at fitting cost."
16 hours ago
Vendetta replied to Fabricante's discussion Engagement Questions
"You typically ask for permission before you give her the engagement ring. As it would be pointless to ask for permission for something you have already done. As for timing, I asked my now wife for her hand about 3 days after I asked my FIL for…"
17 hours ago

© 2017   Created by Brett McKay.   Powered by

Badges  |  Report an Issue  |  Terms of Service