"Thanks I appreciate the advice and the prayers."
Seeking Advice on Tool Collection
Good morning gentlemen,
I recently started putting together my own toolbox, and I have a question about one tool in particular. I purchased a speed square, and while reading about its functions how it combines the elements of three other tools - the framing square, combination square, and try square - I began to wonder, is there any reason or circumstance that a man with a speed square should also have any of the other squares? One of the reasons I started collecting my tools is to learn handyman skills to use around the house, but I'm also interested in learning some carpentry. My first project was going to be a storage shed for my disabled parents (which unfortunately I had to postpone because my mother passed away last week after two weeks in the hospital).
Replies to This Discussion
-
Permalink Reply by Chris C. on
-
While I don't specifically do a lot of carpentry work, I have learned one thing the hard way working on home improvement projects - if something is touted as a "multi tool", it usually does several things OK and nothing really well. I have a speed square and I love it, but I've never built a free-standing structure either.
My two cents, from someone who is a Jack of all but master of none, would be to use it on a bunch of smaller projects whenever you can, to become familiar with it's accuracy and limitations.
I've also learned, when it comes to tools, you get what you pay for. Sometimes you can cobble something together with the tools you have, but that one time you REALLY need a left handed widget you're much further ahead using the right tool.
-
Permalink Reply by David F. on -
My father told me to buy craftsmen tools for the warranty. If you break or thrash them you take them to Sears and get a new one.
Beyond that start slow and get what you need as you need it. You may find an air compressor and finishing nailer the thing for trim. Really what you need is project specific.
-
-
I agree about the Craftsman tools, their hand tools are the best. Watch out, though - not all Craftsman tools carry the free lifetime replacement warranty. Usually it's the "plain jane" tools that do - the fancy screwdrivers with the ergonomic handles and such don't - it's in fine print on the package.
Also, I have never had a craftsman power tool that didn't break on me within a year. Your mileage may varry.
-
Permalink Reply by Alex on
-
"I agree about the Craftsman tools, their hand tools are the best."
You've obviously never used Proto.
-
Permalink Reply by JonEdanger on -
Or Mac. Or SnapOn. Or...
-
Permalink Reply by Chuck Knight on -
It depends on what you're going to do with the tools.
I, too, am a big fan of Craftsman for basic hand tools. I actually search for them at garage sales...pick them up for $0.10 and they're *still* guaranteed forever. For any owner. I asked. Other exceptionally good brands include Home Depot's Husky, Lowes' Kobalt (really good), and surprisingly, if you shop carefully, the Pittsburgh brand at Harbor Freight. Their 1/2" sockets are shockingly good, and have a "forever" warranty, too.
But, be aware that a speed square, and most of the other framing tools you've mentioned, are best for 90 degree angles. Roofing squares are a bit more flexible in that respect, but overall 90 degree angles are their strength. Since I like non-90 degree angles they're of less use to me.
And, to answer your next question, everything from pergolas, to gazebos, to internal structural framing, to a steel framed geodesic dome (octahedral breakdown) and even anticlastic fabric structures.
-
Permalink Reply by Shane on -
Speed squares are just that, speed squares. Their purpose is for rough framing of relatively small dimensional lumber. Framing squares are good for larger dimensions and building stairs and rafters. Tri squares and combination squares are useful for trim carpentry and/or cabinetry/furniture making as they allow for more exactness in measure which a rough framing tool like a speed square can't give.
They all have their place. For a shed, a speed square is more than adequate.
-
Permalink Reply by David F. on
-
Thank you for a very clear statement on the uses. I think tools are created to solve problems, the trick is to know what tool solves or helps with what situation.
-
Permalink Reply by Native Son on
-
It all depends upon what type of projects you're goin to be undertaking.
If you're going to be doing a lot of framing carpentry, i.e., beyond bulding a small shed, a framing or rafter square is very useful.
You'll find yourself in the same situation with levels. I've found, over the years, I've been well served by having four of those: a torpedo level, a 2' spirit level, a 4' spirit level, and a post level (a 90 degree bracket with 3 spirit level bubbles that is used to ensure upright levels on fence & corner posts, and to set horizontal levels for fencing layouts & mason's twine. OTOH, serious carpenters and masons will find my collection of levels to be too limited for big jobs.
-
Permalink Reply by Brian Splash on -
As a tradesman , l have both , the speed square/ adjustable square has many uses that a fixed square falls short , it can be used in a tight spot where a traditional square is to long , it can be used to scribe a line , and you can also get them with a level that is extremely useful when doing roof flashings , but the down side is that after a few months of use they lack the accuracy needed for fine work .
-
Permalink Reply by The Voice of Reason on -
A speed square-much like a Leatherman's tool does many things-none of them well. I possess many squares but I use a combination square more than all the others combined.
Latest Activity
Fountain Pens
“My two fingers on a typewriter have never connected with my brain. My hand on a pen does. A fountain pen, of course. Ball-point pens are only good for filling out forms on a plane.”-Graham GreeneThis group is for those who love fountain pens.See More
Gary Crumrine joined Bill Teeple's group
Manly Hats!
The hat, distinguished by having a brim all the way around, is manly. Let's talk about hats.
Gary Crumrine joined Randall "Skitch" Hodgson's group
Ballroom Dancing
For those of us honest-to-goodness gentlemen who know better. There are few things more manly than leading your lady to the ballroom floor, wearing your best wingtip dance shoes, and leading her in a good old fashioned jive.
Gary Crumrine joined Scott King's group
Knife Collectors & Users
Looking for a safe place to talk knives and not feel like a social outcast, then join us here at Knife Collectors & Users. We just like knives- current productions, antique, custom & tacticals- really anything with a blade.See More
© 2013 Created by Brett McKay.
Powered by
